top of page

OHB8P

623

8 Port Layer 2 PoE+ Ethernet Switch with 4 10G uplinks

Book Now

About

The OHB8P is an ideal solution for small facility deployments or subsections of a facility requiring massive data performance, management, and visibility. Keeping consistent with all IEEE standards, the OHB8P can be deployed for any owner-hosted network while enabling service providers per port data visibility and content controls.


Supporting enterprise features including ICMP, IPv6, MDL Snooping, 802.1d/w/s/p/x, this class of switch set a new standard in the delivery of broadband for multi-tenant facilities. These fanless 11-inch units have a chassis designed for a 1U rackmount and provides 8 10/100/1000Base-TX ports + 2 gigabit SFP and PoE+.


Attributes


Networking Interfaces

8 x 10/100/1000 Mbps RJ45 Ethernet Ports

2 x 1 Gbps SFP Ethernet Ports


Management Interfaces

Web GUI, SSH, SNMP, CLI (Console/Telnet)

LED Indicators

Power, Link/Act, PoE

Performance


Switching Capacity

20 Gbps

Forwarding Capacity

14.9 Mpps

Forwarding Mode

Store and Forward

Packet Buffer Memory

4.1 Mbit

RAM for CPU

1 Gbit

Flash Memory

128 Mbit

MAC Address Table

8K

Max. Jumbo Frame size

16K

VLAN Quantity

4K

ACL Table

512

L3 Interface

32

Port Queues

8

PoE Budget

270W

Physical


Dimensions

10.8 x 7.8 x 1.7 in (275 x 200 x 44 mm)

Weight

5lbs

Operating Temperature

0 to 40℃

Storage Temperature

-10 to 70℃

Operating Humidity

5 to 95% Noncondensing

Power Method

100-240VAC, 50/60Hz

Max. Power Consumption

Including PoE Output: 270W

Excluding PoE Output: 10W


EMC Safety

FCC, CE, RoHS

Cooling

No fan

Power over Ethernet


PoE Interfaces

Ports 1-8

PoE Standard

IEEE802.3af, IEEE802.3at

Max. PoE Wattage per Port

30W

PoE Voltage

46-52VDC

PoE Pin Assignment

V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6)

PoE Management

Port-base PoE status view and control, PoE Schedule, PD Alive Auto Check

 

 

Port Configuration


Enable and Disable

Supports control enable and disable

Auto-Negotiation

Supports force port mode and speed

Flow Control

Supports IEEE802.3x full-duplex

Supports half-duplex backpressure


Storm Control

Supports broadcast, multicast and DLF package rate limit

Port Mirroring

Supports many to one mirroring

Rate Limit


Link Aggregation

Supports manual Link Aggregation

Supports LACP


Up to 8 maximum aggregation groups, each containing up to 8 ports


Aggregation Strategy

Source MAC / Destination MAC / Source Destination MAC

Source IP / Destination IP / Source Destination IP


Port Protection

Each port can be configured into isolated protected port from each other

MAC Configuration


MAC Address Table Management

Supported

Transfer Mode

Supports IVL transfer mode

Static MAC Address

Supported

MAC Binding

Supported

MAC Address Filter

Supported

MAC Quantity Limitation

Supports limit the number of MAC-addresses Learning per port

VLAN Configuration


VLAN Based on 802.1Q

Supported

MAC-Based VLAN

Supported

IP-Based VLAN

Supported

Protocol-Based VLAN

Supported

Voice VLAN

Supported

Guest VLAN

Supported

Private VLAN

Supported

VLAN Mapping

Supports 1:1 mapping

Double VLAN Markup

Supports basic QinQ

Reliability Protocol


Spanning Tree

Supports STP/RSTP/MSTP

BPDU Guard

Supported

BPDU Filter

Supported

Port Loop Detection

Supported

EAPS Protocol

Supports RFC3619

ERPS Protocol

Supports G.8032/Y.1344

LLDP Protocol

Supports LLDP and LLDP-MED

UDLD Protocol

Compatible with UDLD protocol

 

 

Host Routing


Static ARP

Supported

Static Routing

Supported

Multicast


Static Multicast MAC Address

Supported

IGMP SNOOPING

Supported

MVR

Supported

GMRP

Supported

Access Control List (ACL)


Based on Standard IP

Supported

Based on Extend IP

Supported

Based on MAC IP

Supported

Based on MAC ARP

Supported

Based on time

Supported

Port Filtering

Supported

Quality of Service (QOS)


Scheduling Mode

Supports WRR, SP, WFQ

Sorting Based on Port

Supported

Sorting Based on 802.1p

Supported

Sorting Based on DSCP(DiffServ)

Supported

Sorting Based on ACL Data Flow

Supported

QoS Strategy

Supports packet mapped to the corresponding output queue

Supports to modify the packet’s COS and DSCP sign


Supports limit of data flow


Supports statistics of data flow


Supports mirroring of data flow


Security


Administrative Security

Supports start and end TELNET, WEB and SNMP serve

Supports TELNET, WEB and SNMP serve binding with Standard IP ACL


Supports control the number of user for TELNET


CPU Protect

Switch self-security protect, forbid flow attack

IP-MAC Address Binding

Supports binding between static configuration IP, MAC and Port

AAA

Supports 802.1x protocol

Supports RADIUS protocol


Supports RADIUS server authentication authorization and bill


Supports MAC-based 802.1X authentication.


Supports 802.1x guest VLAN


DHCP SNOOPING

Supports dynamic ARP binding to prevent ARP spoofing

Supports dynamic IP, MAC port binding


Supports stationary port connect to DHCP server, to prevent privately connect to DHCP sever


Prevent ARP Spoofing

Supports manual configure ACL rule based on MAC ARP prevent ARP spoofing

Supports DHCP SNOOPING function, switch dynamically binding ARP and port, when the DHCP get IP address , to prevent ARP spoofing


 

 

IPv6


ICMPv6

Supported

IPv6 Neighbor Discovery

Supported

MLD Snooping

Supported

IPv6 Telnet

Supported

Management Feature


CLI Management

Supports serial port management

Supports TELNET management


Supports SSH management


WEB Management

Supported

SNMP Management 

Supports SNMP protocol

Support SNMP TRAP


Supports standard and private MIB


User management

Supports multi-user management

Show CPU Utilization

Supported

Show RAM Utilization

Supported

TACACS+

Supports TACACS+ server remote user name and password authentication

Supports PAP and CHAP password encryption


Supports TACACS+ server command authorization


Log Management

Supported

RMON

Supports RMON 1,2,3,9 group

Cluster Management

Supports neighbor discovery protocol

Supports topology discovery protocol


Supports manual and automated join cluster group


Supports cluster unification management


OAM

Supports 802.3ah

Supports 802.1ag


DHCP Client

Supported

Configuration Download / Upload

Supported

Upgrade Firmware

Supported

Timer Management

Supports local timer management

Supports SNTP protocol get clock


Debugging Tools


PING

Supported

TRACEROUTE

Supported

TELNET Client

Supported

Package List


PoE Switch

1pcs

User Manual

1pcs

Power Cord

1pcs

DB9 to RJ45 Cable

1pcs

Rack Mount Kit

2pcs

Rubber Feet

4pcs


bottom of page